SCSI-ID setting (M3097DG)

The default of SCSI-ID is 5. SCSI-ID is set by Setup mode of the operator panel. The procedure to set SCSI ID is;

1Turn the power ON by pressing “I” side of the power switch. The scanner displays “Scanner Ready” on the lower line of LCD.

2Then press “Next” button. The scanner displays “Mode select 1”.

3Then press “Next” button. The scanner displays “Mode select 2” meaning that setup mode is ready. Then press “ENTER” button.

4Then press “ENTER” button. The scanner displays as follows.

5Press “Previous” once, then the scanner displays “SCSI ID” on the upper line of the LCD.

6Select SCSI ID by pressing “→” or “←” button, and press “ENTER”. (SCSI ID is set.)

7Press “Exit” to return to “Scanner Ready” screen.

2-8