Removing the Carrier Fixing Bracket
To keep the scanner from being damaged during shipping, the carrier unit is fixed with a bracket. After placing the carrier unit at the installation place, remove this bracket as explained below.
qPlace the image scanner on the edge of the desk top so that the left side (where ADF is placed) of the scanner extends from the desk top. Do not set the image scanner upside down or on its side.
CAUTION
Do not extend the scanner more than 20cm (8 in.) from the desk.
Good Bad Bad
less than 20cm (8 in.)
wRemove the carrier fixing bracket from position A. Then install the carrier fixing bracket at position
B.
Front side
Enlarged
| Carier fixing bracket |
| (Position for operation) |
Bottom view |
|
Carier bracket (Position for | B |
storage, position for shipment) |
|
Enlarged section A enlarged | ADF side |
| |
| A |
| Carier bracket |
| (Position for shipment) |
