Setting IPC pre-set mode

When you set the using of IPC-2 pre-set mode, you must set as follows:

1Press or and let the scanner display Screen 42.

2 At Screen 42, press

or

to select

<Screen 42>

 

 

 

 

the document number and press

to

 

 

 

 

 

 

 

 

 

 

 

 

activate the IPC pre-setting. Then the

 

 

 

 

 

 

 

 

 

 

scanner displays Screen 42-1. Go to

 

 

 

 

 

 

 

 

 

 

procedure 3. If you want to disable the

 

 

 

 

 

 

 

 

 

 

IPC pre-setting, select “No” then press

 

 

 

 

 

 

 

 

 

 

. Finally press

to return to

 

 

 

 

 

 

 

 

 

 

“Scanner Ready” screen.

 

 

 

 

 

 

 

 

 

 

 

3 At Screen 42-1, select “Yes” to activate

<Screen 42-1>

 

 

 

 

the IPC pre-setting or select “No” to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

disable the IPC pre-setting. Note that

 

 

 

 

 

 

 

 

 

 

when you activate the IPC pre-setting,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the IPC setting by Host computer is

 

 

 

 

 

 

 

 

 

 

ignored. Finally press

 

, then the

 

 

 

 

 

 

 

 

 

 

scanner displays next item, Screen 43.

 

 

 

 

 

 

 

 

 

 

<Classification of document number>

 

 

 

 

 

 

 

 

 

 

Document number are classified in line-art scanning as follows:

 

 

 

 

The horizontal axis shows the background density/color of paper.

 

 

 

 

The vertical axis shows the density of charcter/ line.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Background density

 

Background color

 

 

 

Normal

 

Dark

 

Red

Green

Blue

 

Normal

q:Normal background

e: Dark background

 

 

 

 

 

 

and character.

and normal-density

 

 

 

 

 

 

 

 

 

 

character.

 

 

 

 

 

Character

 

 

 

 

 

 

 

 

 

 

 

 

 

 

density

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

w:Normal background

 

 

 

 

 

r: Light character

t: Light character

 

 

Light

and light character.

 

 

 

 

 

 

on red paper.

on green paper.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

q- t are the document number set in setup mode.

6-4