3.HARDWARE SETUP
7)Monitor Output Connector (Blue 15-pin VGA)
This connector is for output to a
VGA Monitor
8)USB Header (10-1 pin USBPORT)
If the USB port connectors on the back panel are inadequate, one USB header is available for two additional USB port connectors. Connect the provided USB connector set to the header and mount it to an open slot on your chassis.
Connectors
3. H/W SETUP
510
NC
GND GND
USBP2+ USBP3+
USBP2– USBP3–
USB Power USB Power
1 6
USBPORT
24 | User’s Manual |