4.BIOS SETUP
6.When prompted to confirm the BIOS update, press Y to start the update.
7.The utility starts to program the new BIOS information into the flash ROM. The boot block will be updated automatically only when neces- sary. This will minimize the chance that a failed update will prevent your system from booting up. When the programming is finished, Flashed Successfully will be displayed.
Updating BIOS
4. BIOS SETUP
NOTE: When you see the message “Boot Block is different”, you may still press <Y> to update the BIOS. Yet if the update fails, your system will run a greater risk of boot failure depending on whether the boot block is damaged or not.
User’s Manual | 37 |
