3.HARDWARE SETUP
3.5.2DIMM Installation
Insert the module(s) as shown. Because the number of pins are different on either side of the breaks, the module will only fit in the orientation shown. DIMMs are longer and have different pin contacts on each side and therefore have a higher pin density compared to SIMMs.
System Memory
3. H/W SETUP
CUR-DLS 168-Pin DIMM Sockets
88 Pins
60 Pins
20 Pins
Lock
The DIMMs must be 3.3V “registered” for this motherboard. To determine the DIMM type, check the notches on the DIMMs (see figure below).
The notches on the DIMM module will shift between left, center, or right to identify the type and also to prevent the wrong type from being inserted into the DIMM slot on the motherboard. You must ask your retailer the correct DIMM type before pur- chasing.
18 | User’s Manual |