Fujitsu D1740 technical manual Upgrading main memory, Installing a memory module

Installing and removing processors

Upgrading main memory

Technical data

Technology:	DDR 200, DDR 266 or DDR 333 unbuffered DIMM modules
	184-Pin; 2.5 V; 64 Bit, no ECC
Size:	128 Mbytes up to 2 Gbyte DDR-SDRAM
Granularity:	128, 256, 512 or 1024 Mbyte for one socket

A current list of the memory modules recommended for this mainboard is available on the Internet at: www.fujitsu-siemens.com/mainboards.

At least one memory module must be installed. Memory modules with different memory capacities can be combined.

You may only use unbuffered 2,5 V memory modules. Buffered memory modules are not ! supported.

DDR- DIMM memory modules must meet the PC1600 (DDR 200), the PC2100 (DDR 266) or the PC2700 (DDR 333) specification.

Installing a memory module

2

2

►Push the holders on each side of the memory slot outwards.

►Insert the memory module into the location (1).

►At the same time flip the lateral holders upwards until the memory module snaps in place (2).

18 - English A26361-D1740-Z120-1-6319, Edition: 3