Fujitsu D1859 technical manual BIOS Recovery - Recovering System BIOS, Add-on modules / Upgrading

Add-on modules / Upgrading

BIOS Recovery - Recovering System BIOS

i All BIOS settings are reset to the default values.

►Open the casing as described in the operating manual.

►On the system board set the jumper to the appropriate setting to restore the system BIOS (see chapter "Jumper settings").

►Close the casing as described in the operating manual.

►Insert a BIOS update floppy disk and start the server.

►Note the signals issued from the loudspeaker. You have successfully restored the BIOS if you hear the signal sequence "short-short- long- long- long" and the diskette access indicator is dark. This can take a few minutes.

►Open the casing as described in the operating manual.

►Restore the switch or jumper settings.

►Close the casing as described in the operating manual.

►Remove the floppy disk from the drive.

►Start the server and invoke BIOS Setup.

►Select the menu item Reset Configuration in the menu Advanced and change the setting to Yes.

►Save the change and terminate BIOS Setup.

The BIOS recovery has now been completed. The system restarts.

i	Detailed information on the BIOS recovery is contained in the manual "BIOS Setup"
	("ServerBooks" CD).

D1859 (Econel 50) 27