Brief instructions on installing mainboard
Installation
►Equip the mainboard with the processor, heat sink and memory modules before installation if possible. Further information can be found in "Replacing the processor" chapter.
► Open the casing as described in the operating manual.
► Should no suitable connection field be provided in the case, then you must install the connection field (1) provided.
Ensure the plate is aligned properly so that the connections are suitable for the mainboard later.
► Set the mainboard on the edge on which the connection field is located (2) and then insert the board in the
case (3).
Make sure that spacers in the housing are only mounted at points at which there are mounting holes in the mainboard.
► Fasten the mainboard with the screws.
►Connect the plugs for the power supply, control panel and drives to the corresponding connections on the mainboard.
Driver installation
►Install the drivers for the chipset. You may find the driver on the "Drivers & Utilities" CD. Please refer to chapter "Drivers" for a description of installing drivers.
English - 7 |
