Fujitsu D1961 technical manual APM and Acpi system status, energy-saving modes, Led

APM and ACPI system status, energy-saving modes

APM and ACPI system status, energy-saving modes

	System	ACPI		APM	Power	Power	Power	Wake-up
	status	Status		Status	LED I	LED II	consump	time
		)1			)2	)3	tion
	Normal	G0	S0	On	On/Off	On	Normal
	operation
	Simple	G1	S1	Standby	Off/On	flashing	Almost	Almost
	energy-saving						like	immediatel
	mode						normal	y
	Maximum		S3		Off/On	flashing	RAM,	approx. 5 s
	energy-saving						wake-up
	mode )4						compone
	"Save to						nts
	DRAM"
	Maximum		S4		Off/Off	OFF	RAM,	approx. 20
	energy-saving						wake-up	s
	mode **						compo-
	"Save To						nents
	Disk"
	”Soft Off"	G2	S5	Soft Off	Off/Off	OFF	Nearly	Full boot
							zero	time
	Mechanically	G3		Off	Off/Off	OFF	Zero	Full boot
	Off							time
)1	G = Global status; S = System status
)2	Two colours
)3	One colour
)4	The power supply unit must provide sufficiently loadable 5 V standby voltage.

To use the WOL functionality the power supply must provide a 5 V auxiliary voltage (5VSB) of at least 1 A.

A26361-D1961-Z120-1-7419, edition 2 English - 29