Pin assignment of internal ports
Pin assignment of internal ports
The pin assignment of some internal connections is shown in English in the following.
i | Some of the following connectors may be optional! |
Front panel
Watch the poling of the LEDs. The positive pole of the connection cables is often indicated with a coloured wire.
Power On/Off 3) |
| Power On | ||
Reset1) |
| 1) | LED | 1) 2) |
|
| |||
|
|
| ||
1
2
Recovery Password
Speaker
1)Cable is not included in the delivery scope.
2)
3)both connector positions possible
Connection | Note |
Reset | Connector for reset switch |
Power On/Off | Connection for ATX On/Off switch |
HD LED | Indicates HDD (hard disk) activity |
Power On LED | Indicates the system state APM or ACPI (see annex, section "APM and ACPI |
| system status, |
Password | see "Settings with switches and jumpers" chapter |
Recovery | see "Settings with switches and jumpers" chapter |
Speaker | 0,5 W at 8 Ohm |
Audio In
1
Pin | Signal |
1 | Left CD audio input |
2 | CD GND |
3 | CD GND |
4 | Right CD audio input |
English - 11 |
