Manuals / Fujitsu / Computer Equipment / Computer Hardware

Fujitsu D2151 manual Installing/removing or replacing processor with heat sink, Technical data

Models: D2151

1 42
Download 42 pages 4.69 Kb
Page 14
Image 14

Mainboard D2151

Installing/removing or replacing processor (with heat sink)

!

Disconnect the system from the mains voltage before performing any of the tasks

described below. Details are contained in the operating manual of your system.

 

Technical data

●Intel Pentium 4 with 533, 800 or 1066 MHz front side bus in the LGA775 design

●Intel Celeron D with 533 MHz Front Side Bus in the LGA775 design

●A current list of the processors supported by this mainboard is available on the Internet at: www.fujitsu-siemens.com/mainboards.

Never touch the underside of the processor. Even minor soiling such as grease from ! the skin can impair the processor's operation or destroy the processor.

Place the processor in the socket with extreme care, as the spring contacts of the socket are very delicate and must not be bent.

If one or more spring contacts are bent do not insert the processor in any case as it may be damaged by doing so. Please contact the responsible vendor.

► Remove the heat sink.

The processor socket ist covered with a protective cap to protect the spring contacts In a ! warranty case the mainboard can only be taken back by Fujitsu Siemens Computers with

the protective cap secured!

►Press down the lever and unhook it.

►Fold up the frame.

b

a

b

►Hold the processor between your thumb and index finger and insert it into the socket (b) so that the marking of the processor is aligned with the marking on the socket (a).

►Fold down the frame.

►Press the lever downward until it is hooked in again.

►Remove the protective cap and keep it.

Please note that, depending on the heat ! sink used, different heat sink mounts are

required on the mainboard.

►Depending on the configuration variant, you must pull a protective foil off the heat sink or coat the heat sink with heat conducting paste before fitting it.

►Secure the heat sink - depending on the model - with four screws or push it into the mounts.

2 - English

A26361-D2151-Z110-1-8N19, edition 2

Page 13 Page 15
Page 14
Image 14
Fujitsu D2151 manual Installing/removing or replacing processor with heat sink, Technical data
Page 13 Page 15

D2151 specifications

The Fujitsu D2151 is an advanced server motherboard designed to meet the demands of today's data centers and enterprise environments. Offering a balance of performance, reliability, and expandability, it is ideal for a variety of applications, from general-purpose computing to high-performance tasks.

One of the standout features of the D2151 is its support for Intel's latest Xeon processors. This enables the motherboard to tap into the processing power required for resource-intensive applications, offering multi-core capabilities and enhanced energy efficiency. The integration of the Intel chipset ensures that users benefit from improved memory bandwidth and reduced latency, which is crucial for tasks requiring rapid data access.

Memory performance is further optimized with support for DDR4 RAM, allowing for increased data transfer rates and greater memory capacity. The D2151 can accommodate multiple DIMM slots, enabling configurations that cater to varying workload requirements. This scalability makes it a suitable choice for businesses looking to future-proof their server infrastructure.

In terms of storage, the Fujitsu D2151 supports a range of connectivity options including SATA and NVMe interfaces. This versatility allows for the inclusion of high-speed SSDs, dramatically increasing data transfer rates and enhancing the overall performance of storage-intensive applications. The onboard RAID support further enhances data redundancy and performance, making it a reliable choice for mission-critical workloads.

Networking capabilities are also a key feature of the D2151 motherboard. It is equipped with multiple Ethernet ports that facilitate seamless connectivity and redundancy, ensuring minimal downtime in the event of a network failure. This is particularly advantageous for organizations that rely heavily on consistent network performance.

Moreover, the D2151 includes comprehensive management features, such as remote management capabilities that allow administrators to monitor and manage the system from anywhere. This is essential for maintaining operational efficiency and reducing the need for physical access to the hardware, which can save both time and resources.

The engineering behind the Fujitsu D2151 is focused on providing robustness and reliability. Built with quality components and designed to meet stringent reliability standards, the motherboard is well-suited for continuous operation under demanding conditions.

In summary, the Fujitsu D2151 motherboard stands out as a high-performance, flexible solution for various computing needs. With its compatibility with the latest Intel technologies, robust memory support, extensive storage options, and effective management features, it is undoubtedly a valuable asset for any enterprise looking to enhance its server infrastructure.