Fujitsu D2630 technical manual J4A4 29 Nvram Clear, J8C2 1 BMC Reset, LAN connectors

Connectors and jumpers Features

J4A4 (29) - NVRAM Clear

1-2 NVRAM settings are not cleared

2-3 NVRAM settings cleared

J8C2 (1) - BMC Reset

1-2 BMC enabled

2-3 BMC disabled

3.6.1External connectors

1 2 3 4 5

6

Figure 8: External connectors I/O shield
1	= Video connector	4	= LAN 1
2	= Serial connector	5 = LAN 2
3	= Dual USB connector	6	= GCM connector (not used)

LAN connectors

On this system board you will find one GbE Broadcom LAN controller 5704C. This LAN controller supports the transfer rates of 10 Mbit/s, 100 Mbit/s and

1 Gbit/s. The LAN controller supports WOL function through Magic Packet™.

It is also possible to boot a device without its own boot hard disk via LAN. Here Intel PXE is supported.

20 D2630 (RX600 S3) SAS