1 Introduction
This technical manual describes the system board D2630, which can be equipped with up to four Intel® processors.
Further information about drivers is provided in the readme files on the supplied ServerSupport or ServerStart CDs.
You will find further information in the manual "D2630 Setup Utility".
Notational conventions
The meanings of the symbols and fonts used in this manual are as follows:
italics | indicates commands, menu items, file and path |
| names or software programs |
|
|
fixed font | indicates system output on the monitor |
|
|
indicates values to be entered through the keyboard | |
font |
|
|
|
[Key symbol] | indicates keys according to their representation on the |
| keyboard |
| If capital letters are to be entered explicitly, then the |
| Shift key is shown, e.g. [SHIFT] - [A] for A. |
| If two keys need to be pressed at the same time, then |
| this is shown by placing a hyphen between the two key |
| symbols. |
|
|
“quotation marks” | indicates names and terms that are being empha- |
| sized. |
|
|
Ê | indicates an operation that to be performed |
VCAUTION! indicates warnings, which, if ignored, will endanger your health, destroy the system or lead to the loss of data.
|
|
I | indicates additional information, notes and tips |
Table 1: Notational conventions
D2630 (RX600 S3) SAS | 1 |
