Fujitsu E8210 manual LifeBook Security Application Panel, Setting UP Your Lifebook Security Panel

E8210.book Page 20 Friday, March 10, 2006 4:33 PM

L i f e B o o k E 8 0 0 0 N o t e b o o k

Button 1	Button 3	Enter
	Button 2	Button 4

1

2

3

4 Enter

Enter button

Status Indicator Panel*
	Power/Suspend/
*Shown for reference only.	Resume Button*
Figure 2-19. LifeBook Security/Application Panel

LifeBook Security/

Application Panel

A unique feature of your LifeBook notebook is the Security/Application Panel that allows you to secure your notebook from unauthorized use. The Security/Applica- tion Panel also allows you to launch applications with the touch of a button when your system is on.

If the security system is activated, upon starting your notebook or resuming from suspend mode the security system requires you to enter a password code using the buttons on the Security/Application Panel. After entering a correct password, your notebook resumes system operation. (Figure 2-19)

SETTING UP YOUR

LIFEBOOK SECURITY PANEL

When you receive your LifeBook notebook, the security panel application is pre-installed without any passwords. The following sections provide detailed information on your security panel, and how to set, change or remove passwords.

Numbered Buttons

Use these buttons to enter your password.(Figure 2-19)

Enter Button

After entering the button strokes, push this button to enter the password into the LifeBook notebook. (Figure 2-19)

PASSWORDS

The user and supervisor password may be set on this notebook. A supervisor password is typically the same for all LifeBook notebooks in a working group, office, or company to allow for system management. Individual LifeBook notebooks in a group environment should not use a common password. A password consists of one to five button strokes plus the [Enter] button. A valid stroke consists of pushing one or up to four buttons simultaneously. The following are valid button strokes:

20

■Pushing [4] by itself

■Pushing [2] and [3] at the same time

■Pushing [1], [2], and [4] at the same time

■Pushing [1], [2], [3], and [4] at the same time

The following are valid passwords. The numbers within braces ({ }) are button strokes using more than one button.

■{[2]+[3]}, [1], [enter]

■[4], [enter]

■{[1]+[3]}, {[2]+[3]+[4]}, [1], [4], [2], [enter]

Setting Passwords

When shipped from the factory, no passwords are set. You have a choice of having no password or setting a supervisor and user password. You must set the super- visor password before the user password.

The purpose of supervisor password is to be able to bypass the user password in case the user password is forgotten. The supervisor password alone will not lock the system.

You must set both the supervisor and user passwords for the security panel to work.

Setting Supervisor Password

You must have set a supervisor password before setting any user passwords. The supervisor password can bypass the user password.

1.Go to the Start menu.

2.Click on Run.

3.Type in:

C:\Program Files\Fujitsu\ Security Panel Application\ Supervisor\FJSECS.EXE,

then press [Enter]

4.Follow the on-screen instructions to set the Supervisor password.