7.Select a language used for installation on [Choose Setup Language] window and click [OK].

8.Install the application following the instructions in the window.9.When the [InstallShield Wiizard Complete] window appears, click [Finish].

10.Your computer is restarted and the scanner wil be detected. Do not remove the Setup CD-ROM from the CD drive until your PC will be completely restarted.

Depending on the OS, the following operations may be necessary.

ATTENTION

For Windows 98:

When a request for inserting the CD-ROM of Winows 98 appears, insert it into the CD drive and click the [OK] button.

For Windows 2000:

When [Digital Signature not Found] appears, click [Yes].

For Windows XP:

1.When [Found New Hardware Wizard] appears, confirm that the Setup CD-ROM is set in the CD drive, then click the [Next] button.

2.When any alarm is displayed on [Hardware Installation] window, click the [Continue Anyway] button.

3.Click the [Finish] button.

Now the installation of the scanner driver is completed.

ATTENTION

For confirming if the installation was successful, perform a scanning operation by using an application that complies with the TWAIN standard such as ScandAll 21.

2-22

 

2.3 Installing the Scanner Driver and Application