■Alarm messages (Hardware errors: Check LED lighting)
The following messages are displayed, when an error occurs inside the sccaner. In this case, please switch the scanner off and on again.
If the same message is displayed again, please contact to a distributor or an authorized FUJITSU scanner service provider.
<Optical alarm > | The following message is displayed, when an error occurs at the front side | |||||||||
(Front side) | optical unit. |
|
|
|
|
|
|
|
|
|
| F | r | o | n | t | S | i | d e |
|
|
| O p t | i | c a l |
| A l | a r | m | |||
<Optical alarm > | The following message is displayed, when an error occurs at the back side | |||||||||
(Back side) | optical unit. |
|
|
|
|
|
|
|
|
|
| B | a | c | k | S | i | d | e |
|
|
| O p t | i | c a l |
| A l | a r | m | |||
<Motor fuse alarm> (Transport motor)
The following messages are displayed, when the fuse of particular motors (Transport motor, Separation motor, Pick motor, Hopper motor) blows out.
F | u | s | e | a | l | a | r | m |
F | e | e | d | m | o | t | o | r |
(Separation motor)
F u | s e | a | l | a r | m |
S e p a r | a t i | o | n | m | o t o r |
(Pick motor)
F | u | s | e | a | l | a | r | m |
P | i | c | k | m | o | t | o | r |
(Hopper motor)
F u | s e |
| a l a | r | m |
H o p | p e | r | m o | t | o r |