APPENDIX-3 TROUBLESHOOTING

Should any of the following problems arise, refer to the relevant section listed below.

Scanner cannot be turned on.

Refer to Chapter 5.2 Troubleshooting “Symptom1” of the fi-4860C Operator’s Guide.

The operator panel LCD goes out.

Refer to Chapter 5.2 Troubleshooting “Symptom2” of the fi-4860C Operator’s Guide.

Scanning does not start.

Refer to Chapter 5.2 Troubleshooting “Symptom3” of the fi-4860C Operator’s Guide.

Quality of scanned pictures and photographs is not satisfactory.

Refer to Chapter 5.2 Troubleshooting “Symptom4” of the fi-4860C Operator’s Guide.

Quality of scanned text or lines is unsatisfactory.

Refer to Chapter 5.2 Troubleshooting “Symptom5” of the fi-4860C Operator’s Guide.

The scanned image is distorted and/or not sharp.

Refer to Chapter 5.2 Troubleshooting “Symptom6” of the fi-4860C Operator’s Guide.

Vertical streaks appear in the scanned image.

Refer to Chapter 5.2 Troubleshooting “Symptom7” of the fi-4860C Operator’s Guide.

Check LED starts blinking right after power on.

Refer to Chapter 5.2 Troubleshooting “Symptom8” of the fi-4860C Operator’s Guide.

The Check LED lights right after power on.

Refer to Chapter 5.2 Troubleshooting “Symptom9” of the fi-4860C Operator’s Guide.

Double-feed occurs frequently.

Refer to Chapter 5.2 Troubleshooting “Symptom10” of the fi-4860C Operator’s Guide.

Document jam occurs frequently.

Refer to Chapter 5.2 Troubleshooting “Symptom11” of the fi-4860C Operator’s Guide.

There is a shadow on the leading edge of the scanned image.

Refer to Chapter 5.2 Troubleshooting “Symptom12” of the fi-4860C Operator’s Guide.

AP-15