HINT

1.4 How to Use Scanner Drivers

If you select Color or Grayscale mode for a side (Front Image #1 or Back Image #1), you can select only Binary (black-and-white) mode for the same side (Front Image #2 or Back Image #2, respectively). In turn, if you select Binary (black-and-white) mode for a side (Front Image #1 or Back Image #1), you can select either Color or Grayscale mode for the same side (Front Side #2 or Back Image #2, respectively).

1

ModeYou can select a color mode to use from the menu.
IPC: Documents are scanned in binary (black-and-white) mode

 

with Image Processing Software Option. When this setting

 

is selected, the [Setup IPC] button below becomes

 

selectable. (This button is visible only if Image Processing

 

Software Option is installed on the computer.)

Black & White

: Documents are scanned according to a binary threshold.

 

Black and white are distinguished based on this set

 

threshold. This mode is suitable for scanning line drawings

 

and text only documents.
16-level Grayscale: Documents are scanned in 16 gray levels. In this mode,

 

each pixel uses 4 bits.
256-level Grayscale: Documents are scanned in 256 gray levels. In this mode,

 

each pixel uses 8 bits.
24-bit Color: Documents are scanned as 24-bit full-color images. This

 

mode is suitable for scanning color photographs. More

 

memory is used than in Grayscale mode.
Auto Detect: This mode automatically detects whether the scanned

16-level Grayscale

documents are color or binary (black-and-white). In this

256-level Grayscale

mode, color documents are output as color or grayscale

24-bit Color

images, and monochrome documents are output as binary

 

(black-and-white) images. Under [Camera], configure

 

settings for detected-as-color documents with #1, and

 

configure settings for detected-as-black-and-white

 

documents with #2.
[Setup IPC] Button

Click this button when configuring settings for scanning with Image Processing Software Option.

For how to configure settings for Image Processing Software Option, refer

HINT

 

to "Image Processing Software Option USER’S GUIDE". To view "Image

 

 

 

 

Processing Software Option USER’S GUIDE", from the [start] menu, select

 

 

 

 

[All Programs] D [Image Processing Software Option] D [USER’S

 

 

GUIDE].

OPERATIONS SCANNER BASIC

fi-5530C2 Image Scanner Operator’s Guide

 

17