Fujitsu fi-5530C2 3.1Cleaning Materials and Locations requiring Cleaning, Remarks, Parts Number, Part to clean, Cleaning Materials, ■Cleaning Materials, Standard Cleaning Cycle

3.1Cleaning Materials and Locations requiring Cleaning

■Cleaning Materials

Cleaning Materials	Parts Number	Remarks
Cleaner F1	PA03950-0352	1 bottle
	(*1)	Moisten a cloth with this fluid and wipe the
		scanner clean.

Cleaning Wipe	PA03950-0419	24 sheets/pack
		Pre-moistened with Cleaner F1, Cleaning
		Wipes are used instead of moistened cloths.

PFU LIMITED

Lint-free dry cloth - Commercially available one

For details about the cleaning materials, contact the FUJITSU scanner dealer where you purchased the scanner.

*1) It may take long before the cleaner vaporizes if a large quantity is used. When cleaning the scanner parts, dampen a cloth with modest quantities of the cleaner. In addition, wipe off the cleaner completely with a soft lint-free cloth to leave no residue on the surface of the cleaned parts.

■Locations and Cycle for Cleaning

The following table shows a standard cycle provided as a guide for cleaning each location.

Part to clean	Standard Cleaning Cycle
Pad ASSY	Clean these parts after every 5,000 scans.
Pick roller
Feed rollers
Plastic rollers
Eject rollers
Sheet guides
Glass
Ultra sonic sensor

78