2.9 Detecting Multifeeds

2.Click the [Multifeed] button.

⇒The following dialog box appears.

3.Configure settings in the [Specify Area for Multifeed Detection] dialog box.

1)Mark the [Enable] check box.

• You can specify an area in the direction of the length of the document

HINT

 

for detecting multifeed errors.

 

 

 

 

• Unless the [Enable] checkbox is marked, the area of [Select area for

 

 

 

 

applying Multifeed Detection] or [Select area for not applying Multifeed

 

 

Detection] cannot be specified. In this case, normal multifeed detection

 

 

described above is performed. (Refer to "6.5 Specifying How to Detect

 

 

Multifeed" on page 129.)

2)Select whether you want to specify an area to enable or disable multifeed detection.

•To specify an area for which the Multifeed Detection is performed:

⇒Select the [Select area for applying Multifeed Detection] button.

•To specify an area for which the Multifeed Detection is NOT performed:

⇒Select the [Select area for not applying Multifeed Detection] radio button.

3)Specify the [Start] position in the area.

Enter a distance from the top of the document as a starting position in millimeter. (Select an even number from 0 mm to 510 mm)

4) Specify the [End] position in the area.

Enter a distance from the the top of the document. (Select an even number from 0 mm to 510 mm)

ATTENTION

The number you enter as the [End] position must be larger than that of

 

the [Start] position.

2

DOCUMENTS OF TYPES VARIOUS SCANNING

fi-5530C2 Image Scanner Operator’s Guide

 

61