2.6 Replacing the Print Cartridge
|
|
| Make sure that you turn off the scanner |
|
|
| power and unplug the power cable from the |
|
|
| outlet. |
| CAUTION |
| |
|
| If the cartridge replacement is done with | |
|
|
| |
|
|
| |
|
|
| power turned on, it may cause electric shock |
|
|
| or imprinter failure. |
Replace the Print Cartridge as follows: | |||
|
|
| |
|
|
| |
ATTENTION | ● When the following message appears, replace | ||
|
|
| the Print Cartridge as soon as possible. |
●If you continue to print without replacing the cartridge, your print output will continue to appear lighter and lighter.
●When installing or replacing the print cartridge, be careful not to insert it out of place.
1.Turn off the Scanner.
2.Open the imprinter cover.
Imprinter cover
3.Move the Print cartridge holder to where the cartridge can be removed easily.
4.Turn the blue lever toward left and open the cartridge holder.
5.Take out the Print cartridge from the holder.
6.Take the new Print Cartridge out of its pouch and detach the protection tape from the Print Cartridge.
ATTENTION | Do not touch the metal part of the cartridge |
| nor put the tape back again. |
7.Insert the Print Cartridge.
HINT | ● Insert the cartridge with its Tab positioned |
| toward left side and install it. |
● Be careful not to let the print cartridge touch or catch on to the print circuit film.