Introduction

Thank you for purchasing the fi-590PRF Imprinter option for fi-5900C Color Image Scanner.

This guide explains how to install and use the imprinter. (For further details about the functions and operations of fi-5900C Image Scanner, refer to the “fi-5900C Image Scanner Operator’s Guide” included in fi-5900C Setup CD-ROM.)

This guide also contains other important information, such as procedures for replacement of consumables. Keep this guide in a convenient and safe place so that you can refer to it whenever necessary.

We hope this manual will be helpful in your future use of the fi-590PRF Imprinter.

Manufacturer

PFU LIMITED

Imaging Products Division,

Image Products Sales Dept., Products Group

Solid Square East Tower

580Horikawa-cho Saiwai-ku, Kawasaki-shi Kanagawa 212 - 8563 Japan

Phone: +81 (44) 540 - 4538

Trademarks

Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation in the United States and/or other countries.

Other product names are the trademarks or registered trademarks of the respective companies.

How Trademarks Are Indicated In This Manual

References to operating systems (OS) are indicated as follows:

Windows 95:

Microsoft® Windows® 95 operating

 

system.

Windows NT 4.0:

Microsoft® Windows NT® Server

 

operating system version 4.0,

 

Microsoft® Windows NT® Workstation

 

operating system version 4.0.

Windows 98:

Microsoft® Windows® 98 operating

 

system.

Windows Me:

Microsoft® Windows® Millennium

 

Edition operating system.

Windows 2000:

Microsoft® Windows® 2000

 

Professional operating system.

Windows XP:

Microsoft® Windows® XP

 

Professional operating system,

 

Microsoft® Windows® XP Home

 

Edition operating system.

Where there is no distinction between the different versions of the above operating system, the general term "Windows" is used.

Regulatory Information

FCC declaration

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna..

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is located.

-Consult your dealer or an experienced radio/TV

technician.

FCC warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Canadian DOC Regulations

This digital apparatus does not exceed the Class A limit for radio noise emissions from digital apparatus set out in the Radio interference Regulations of the Canadian Department of Communications.

This Class A digital apparatus complies with Canadian ICES-003.

Le pésent appareil numérique n’ément pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescridtes dans le Réglesment sur le brouillage radioélectrique dicté par le ministere des Communications du Canada.

Cet appareil numérique de la classe A est conformme à la norme NMB-003 du Canada.

fi-590PRF Imprinter Operator’s Guide 1