8.Remove protection tape from the print cartridge.
ATTENTION | Do not touch the metal part of the cartridge |
| nor put the tape back again. |
9.When the lever is closed, rotate the lever toward left to open before placing the print cartridge.
Tab
ATTENTION | ● Insert the cartridge with its Tab positioned |
| toward left side and install it. |
●Note that the cartridge cannot be inserted properly if it is inclined.
10.Turn the lever on the print cartridge toward right to fix it.
11. Close the imprinter cover.
2.2 Operating Test
After installing the imprinter, test to see if printing can be performed on the Offline Print Test mode.
1. While pressing the [Hopper Height] button ( or ) on the operator panel, switch on the scanner.
Continue pressing on the [Hopper Height] button.
2.Release the [Hopper Height] button when the Function Number Display changes from [P] to [b].
3.Place a blank document on the Hopper.
ATTENTION | ● Use A4 or Letter size paper. If the size is |
| smaller than A4 or Letter, printing may not |
| successfully complete. |
●Confirm that the Print Cartridge is positioned within the document width.
4.Press [Scan] button to test.
ÖPaper will feed into the Hopper, and the Imprinter will print out the Print Test Characters starting at 5mm (±4mm) from the paper’s edge.
6