HINT
Print test patterns
Test pattern 1 (Horizontal): ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`00000000
Test pattern 2 (Horizontal）: abcdefghijklmnopqrstuvwxyz{}~ 00000000
Test pattern 3 (Horizontal):
Test pattern 4(Vertical): ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`00000000
Test pattern 5 (Vertical): abcdefghijklmnopqrstuvwxyz{}~ 00000000
Test pattern 6 (Vertical):
When multiple sheets of documents are placed in the Hopper, the Test Print repeats patterns from 1 through 6.
The numbering data portion “00000000” changes from 0 (Zero) with increment of 1(one).
(One test pattern is printed at a time. Press the [Scan] button to continue printing the next test pattern.)
2.3 Positioning the Print Cartridge
To Position the print cartridge for printing:
1.Open the imprinter cover.
Imprinter cover
2.Place the print alignment mark to the position where you want to print.
directionFeeding
6 5mm
5
4
3
2
c
Test pattern print sample
5.To stop Offline Print test mode, turn off the Scanner.
| Print start |
| position |
HINT | ● The small “▲” protruding from the side of the |
| print cartridge holder indicates the print start |
| position on the page. |
●Above the print cartridge tray are document paper size markings; please use them to adjust for printing positions.
●Do not set the print cartridge within the printing prohibited area; otherwise, the document may stain with ink.
●Put the actual document in the Hopper and confirm that the print cartridge is positioned within the document’s width.
3.Close the imprinter cover.