Safety Information

The attached Safety Precautions manual contains important information about the safe and correct use of this product. Make sure that you read and understand it before using the scanner.

Symbols Used in This Manual

The following symbols are used in this manual.
SymbolDescription
This indication alerts operators to WARNING an operation that, if not strictly
observed, may result in severe injury or death.
This indication alerts operators to CAUTION an operation that, if not strictly
observed, may result in safety hazards to personnel or damage to the product.

This symbol alerts operators to particularly important information. Be sure to read this information.

This symbol alerts operators to helpful advice regarding operation.

Removing the Protective Packaging

The scanner is secured with orange protective tape. Peel off the tape before using the scanner.

Installing the Software

Bundled Software

The following software are bundled with the scanner:
zTWAIN Driver

Conforms to the TWAIN standard. Used when you operate the scanner using TWAIN- compliant applications.

zISIS Driver

Conforms to the ISIS standard. Used when you operate the scanner using ISIS-compliant applications.

zKofax VRS Professional
(hereinafter referred to as “Kofax VRS”)

An application that allows you to generate high -quality images by automatically correcting skewed images and characters blurred by coloring and shading. Kofax VRS uses ISIS driver which is installed together with Kofax VRS.

zSoftware Operation Panel

Configure various settings such as the operation of the scanner and managing the consumables. Installed together with the TWAIN driver, ISIS driver and Kofax VRS.

zError Recovery Guide

Shows the error status and countermeasures when an error occurs. Installed together with the TWAIN driver and ISIS driver.

zImage Processing Software Option (Trial)

A software option featuring advanced binarization of scanned images.

zScandAll PRO

An image scanning application which supports both TWAIN and ISIS drivers. By defining scan settings as profiles, you can customize the settings according to your preference.

zScandAll PRO ScanSnap mode Add-in (hereinafter referred to as “ScanSnap mode”)

An add-in application which provides a different set of driver settings as an alternative to using ScandAll PRO. TWAIN driver is required to use this application. Enables easy scanning with a single button. ScandAll PRO must be installed in order to install this software.

2