*1: Kofax VRS is not supported.
*2: QuickScan Pro is not supported with 64-bit operating systems.
*3: ScandAll PRO, ScanSnap mode, Scan to Microsoft SharePoint, and ABBYY FineReader for ScanSnap™ are not supported.
*4: Scanner Central Admin Agent is not supported.
*5: Required disk space varies according to the file size of the scanned images.
This manual uses screenshots from Windows® 7. The windows that appear and the operations differ by the operating system that you are using.
Where there is no distinction between the different versions of the operating system shown in the table of system requirements, the general term Windows® is used.
Installing the Bundled Software
Install the bundled software from the Setup DVD- ROM in the following procedure.
Note that there are two ways to install the bundled software: select [INSTALL (Recommended)] to install all the software required to operate the scanner, or [INSTALL (Custom)] to select and install one software at a time.
zIf an old version of the software is installed already, uninstall it first. For details about the uninstallation procedures, refer to "A.5 Uninstalling the Software" in the Operator's Guide.
zLog on as a user with Administrator privileges.
■INSTALL (Recommended)
The following software are installed:
zTWAIN Driver
zISIS Driver
zKofax VRS
zSoftware Operation Panel
zError Recovery Guide
zScandAll PRO
zScanSnap mode
zABBYY FineReader for ScanSnap™
zUser’s Guide
zScanner Central Admin Agent
zAdobe® Reader®
1. Turn on the computer and log onto Windows®.
2. Insert the Setup DVD-ROM into the DVD drive.
DThe [FUJITSU Image Scanner Setup] screen appears.
If the [FUJITSU Image Scanner Setup] screen does not appear,
3. Click the [INSTALL (Recommended] button.
4. Follow the instructions on the screen to proceed with the installation.
■ INSTALL (Custom)
1. Perform steps 1. to 2. in "INSTALL (Recommended) (page 4)".
2. Click the [INSTALL (Custom)] button.
DThe [INSTALL PRODUCTS] screen appears.
4