Fujitsu FI-6130Z, fi-6140Z, fi-6230Z, FI-6240Z ISIS, Model, TWAIN, Driver, Driver, Stacker, Stacker, FUJITSU, Fujitsu, FUJITSU, Fujitsu, FUJITSU, Fujitsu, Scanner, FUJITSU, Fujitsu, fi-6130Z, fi-6130Z

3. Load a document in the scanner.1.Pull out the chute extensions according to the length of the document.

2.Lift up the stacker and stacker extensions according to the length of the document.

3.Load the document face-down in the ADF paper chute.4.Adjust the side guides to the width of the document.

zfi-6130Z/fi-6140Z
Side guide	Chute extension 2

Chute extension 1Stacker Stacker extension 1Stacker extension 3 Stacker extension 2zfi-6230Z/fi-6240Z Chute extension 2

Chute extension 1

Side guide

Stacker

Stacker extension

4. Start up ScandAll PRO.

Select the [Start] menu J [All Programs] J [Fujitsu ScandAll PRO] J [ScandAll PRO].

5. Select the [Tool] menu J [Preferences].DThe [Setup] dialog box appears.6.In the [Scan] tab, select a scanner driver and click the [OK] button.Select [TWAIN] for TWAIN driver, and [ISIS / VRS] for ISIS driver or Kofax VRS.7.Select the [Scan] menu J [Select Scanner].DThe [Select Scanner] dialog box appears.

8. Select a scanner, and then click the [Select] button.

Make sure to select the scanner model that is connected to the computer. The displayed model name varies depending on the driver.

Model	TWAIN	ISIS	Kofax VRS
	Driver	Driver
fi-6130Z	FUJITSU	Fujitsu
	fi-6130Zdj	fi-6130Z
fi-6230Z	FUJITSU	Fujitsu
	fi-6230Zdj	fi-6230Z	Kofax VRS
fi-6140Z	FUJITSU	Fujitsu	Scanner
	fi-6140Zdj	fi-6140Z
fi-6240Z	FUJITSU	Fujitsu
	fi-6240Zdj	fi-6240Z

When using Kofax VRS for the first time, the [Register Kofax VRS] screen appears. User registration is required to obtain support information from Kofax as well as to upgrade the software, though Kofax VRS can still be used without user registration.

To register later, select [Start] menu J [All Programs] J [Kofax VRS] J [Kofax VRS Administration Console], and follow the on-screen instructions. For details, refer to the Kofax VRS Installation Guide (PDF) which is included in the Setup DVD-ROM (\VRS\SVRS\Documentation\).

9. Select the [Scan] menu J [Scan Settings].D The [Scan Settings] dialog box appears.10.Clear the [Save to file] check box.You do not have to save to file because this is only a test.11. Click the [Scanner Setting] button.DThe scanner driver's setup dialog box appears.

12.Configure scan settings such as resolution and paper size, and then click the [OK] button.

7