Fujitsu FS-1004EX user manual Notes for Cascaded Connections

8.Notes for Cascaded Connections

When creating cascaded connections with a previous model device (FS-104 or FS-108), make sure to set this device as a master.

When creating cascaded connections with Fujitsu advanced model (FS-1004, FS-1008 or FS-1016), connect FS-1004EX at the slave side. (The OSD function will be effective.)

Use 1.8m dedicated PS/2 cables. Also, there are function limitations, as stated below.

<Example of cascaded connection>

Slaves

FS-104AT or FS-1004EX

FS-108AT or FS-1004EX

FS-104AT or FS-1004EX

FS-108AT or FS-1004EX

Master

FS-1004EX

1.Function Limitation (When the slave side is FS-104 or FS-108)

A.Switching cannot be done directly by pressing the SELECT key of the slave side. First, with the SELECT key of the master side, switch to the port connected to the slave side.

B.The monitor setting data cannot be saved in the slave side. To use the PnP function of the monitor, boot with the PC already selected. If not, disable the automatic PnP recognition (from the PC).

12