3.Auto Scan Mode
Switch automatically after a certain period.
(1)During the Hot Key Mode, press the number <0> key for automatic switching. The SELECT LED changes from a quick blink to a slow blink.
(2)The switching interval can be adjusted by pressing the <↑> cursor key to make it shorter or the <↓> cursor key to make it longer.
(3)Allowed Auto Scan Intervals are: 3, 5, 10 (default), 20, 40 and 60 seconds.
(4)PC’s that are powered OFF will not be switched and will be skipped.
(5)No normal keyboard or mouse input is accepted while the Auto Scan Mode is running.
(6)To cancel the Hot Key Mode, press the End key.
4.Enabling or Disabling the Hot Keys
The Hot Keys can be enabled or disabled by setting. Set the status as necessary.
At the time of purchase, all Hot Keys are enabled. The setting is retained when the power is turned off.
(1)Disabling the Hot Keys
While pressing the select switch "2", press the Hot Key you want to disable. Do not release the select switch before pressing the Hot Key, or the setting will not be done. Once the setting is done, the Hot Key cannot be used. Change the status when necessary. Other Hot Keys can be disabled in the same way.
<Example> While pressing the select switch "2", press <Ctrl> + <Alt> + <Shift>.
(2)Enabling the Hot Keys
While pressing the select switch "1", press the Hot Key you want to enable. Do not release the select switch before pressing the Hot Key, or the setting will not be done. Once the setting is done, the Hot Key can be used. Change the status when necessary. Other Hot Keys can be enabled in the same way.
<Example> While pressing the select switch "1", press <Ctrl> + <Alt> + <Shift>.
(3)Initializing the Hot Keys
While pressing the select switches "1" and "3", press the reset button. The SELECT LED blinks and all Hot Keys are enabled.
5.Monitor Setting
Saves the monitor setting data (VESA DDC2/EDID) to all ports. At the PC's
(1)Connect the monitor and set its power ON.
(2)While this device's power is ON (while the power of one or more PC’s is ON, or while the AC adapter is connected), press the reset switch.
(3)The SELECT LED blinks and the setting data (VESA DDC2/EDID) is saved to all ports. At the same time, all LED's (Num Lock, Caps Lock and Scroll Lock) on the keyboard blink. While blinking, no normal keyboard or mouse input is accepted.
(4)After completion, the SELECT LED stays on. And the LED's on the keyboard return to normal.
(5)Pressing the <E> key in Hot Key Mode performs the same process.
(6)With cascaded connections, pressing the RESET switch on the master side saves the data to the slave side at the same time. (No need to press the RESET button on the slave side)
(7)The setting data is retained even when all the PC’s are turned OFF, and will be enabled at PC
*The PnP function needs to be supported by the monitor and the PC. It does not work in a
11
