Viking Access Systems Q7 manual Viking Heater, Viking Lock Mode, Heater Cls On Heater Opn On

CONTROL BOARD SETUP

Viking Heater

The operator has an integrated heater that is thermostatically controlled. Activate this feature when the operator is used in application temperatures down to -20°F (-29°C).

To set the heater to turn on at the Close Limit:

1.Use the “Diagnose” button to scroll through the LCD Display to “HEATER CLS”

2.Press and hold the “Stop” button on the control board.

3.Press and release the “Diagnose” button to turn this feature ON and OFF.

To set the heater to turn on at the Open Limit:

1.Use the “Diagnose” button to scroll through the LCD Display to “HEATER OPN”

2.Perform steps 2-3 as described above.

HEATER CLS ON

HEATER OPN ON

NOTE: If the application requires the gate to be held open for any reason, set the HEATER ON for both limit positions.

!IMPORTANT: A POSITIVE STOP must be used on the gate at the limit position(s) the HEATER has been set for.

Viking Lock Mode

Turning this feature ON will secure the gate at the closed position, preventing unauthorized manual entry.

Use the LCD Display to activate this feature.

1.Use the “Diagnose” button to scroll through the LCD menu to “LOCK MOD”

2.Press and hold the “Stop” button on the control board.

3.Press and release the “Diagnose” button to turn this feature ON and OFF.

LOCK MOD ON

VIKING TECHNICAL SUPPORT 1.800.908.0884 2 7