CONTROL BOARD SETUP
Initial Settings
“Speed” Motor Speed
Increases or decreases the speed of gate travel.
“Overlap” Overlap Delay
Delays the gate from opening for the selected amount of time from
!Typically not used on slide gates. For Master/Slave application, the control board that has this feature turned on is the master and will close first.
“ODS”
Obstruction Detection Sensor
Sets the amount of force required to trip the inherent obstruction sensor.
See page 26 for more details about this feature.
“Timer”
Hold Open Timer
Automatically closes the gate after the selected amount of time from
Turning the dial between “0” and “OFF” will disable this feature, requiring a close command to close the gate.
2 4 | VIKING TECHNICAL SUPPORT 1.800.908.0884 |
|
|
