LCD monitor

The monitor must be disposed of in accordance with the local regulations for disposal of special waste. The screen background lighting contains mercury. You must observe the applicable handling and disposal safety regulations for fluorescent tubes.

Only qualified technicians should repair the device. Unauthorised opening and incorrect repair may greatly endanger the user (electric shock, fire risk).

Use a screen saver with moving images and activate the power management for your monitor to prevent still images from "burning in".

The screen may only be operated in the wide format (0° landscape mode). Turning with a swivel arm or wall bracket mounted is not permitted.

Store this manual close to the device. If you pass the device on to third parties, you should pass this manual on with it.

Power cable

To guarantee safe operation, use the cable supplied. Use the following guidelines if it is necessary to replace the original cable set.

The female/male receptacles of the cord set must meet IEC60320/CEE-22 requirements.

The cable has to be HAR-certified or VDE-certified. The mark HAR or VDE will appear on the outer sheath.

For devices which are mounted on a desk or table, type SVT or SJT cable sets may be used.

The cable set must be selected according to the rated current for your device.

If necessary, replace the original power cable with a regular grounded 3-core mains lead.

Transport

Transport the monitor with care and only in its original packaging or another corresponding packaging fit to protect it against knocks and jolts.

Never drop the LCD monitor (danger of glass breakage).

edition 1

3

Page 22
Image 22
Fujitsu L17-3, L19-2, L17-2, L17-4 manual Power cable, Transport