Fujitsu M4000/M5000 The following example shows output for one iostat command., -e

B-10 SPARC Enterprise M4000/M5000 Servers Installation Guide • December 2010
The following example shows output for one iostat command.
-e Displaysdevice error summary statistics. The total
errors,hard errors, soft errors, and transport errors
aredisplayed.
Providesa short table with accumulated
errors.Identifies suspect I/O devices.
-E Displays all device error statistics. Providesinformation about devices:
manufacturer,model number, serial
number,size, and errors.
-n Displays names in descriptive format. Descriptiveformat helps identify devices.
-x For each drive, reports extended drive statistics.
The output is in tabular form.
Providesrate information, similar to the
-e option, . This helps identify poor
performance of internal devices and
other I/O devices acrossthe network.
#iostat -En
c0t0d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: SEAGATE Product: ST973401LSUN72G Revision: 0556 Serial
No: 0521104T9D
Size: 73.40GB <73400057856 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
c0t1d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: SEAGATE Product: ST973401LSUN72G Revision: 0556 Serial
No: 0521104V3V
Size: 73.40GB <73400057856 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
#
TABLEB-3 Options for iostat (Continued)
Option Description HowIt Can Help