1-34 SPARC Enterprise M8000/M9000 Servers Site Planning Guide • April 2008
Method of Securing the Device Through a Hole in the Floor
FIGURE 1-26 Cabinet Stabilization Measure: Securing the Device Through a Hole in the
Floor
Vibration-proof feet order number:
CA06620-H902
Note 1: By specifying the above, you can
issue an order to get the following parts. (You
should order the bolt separately.)
F6-DA6G (x4)
Change this board leg (height adjustment
leg) to the "F6-DA6G" and tighten the bolt
from under the floor.
Bolt diameter: M20
Bolt length: 15 mm + floor thickness
Note 2: Consult with the company that con-
structed the building because the length
depends on the structure of the building.
(Floor)
(Device)