Installation Requirements
(3)Limitation of
Mount the HDDs using the 4 screw holes at the both ends on the both sides as shown in Figure 4.4. Do not use the center hole by itself.
In case of using the center hole, it must be used in combination with 2 holes on both ends. (Total 6 screws for 6 holes enclosed)
4
Holes for mounting screw
3
2
Holes for mounting screw
1
In case‚of using a center hole, use it in combination with the holes of both ends.
Use four holes (No.1 to No.4) to mount.
Figure 4.4 Limitation of side-mounting
(4)Limitation of
Use all 4 mounting holes on the bottom face.
