Ordering Information, Part number Package Remarks | Fujitsu MB3788

MB3788

■NOTES ON USE

•Take account of common impedance when designing the earth line on a printed wiring board.

•Take measures against static electricity.

-For semiconductors, use antistatic or conductive containers.

-When storing or carrying a printed circuit board after chip mounting, put it in a conductive bag or container.

-The work table, tools and measuring instruments must be grounded.

-The worker must put on a grounding device containing 250 kΩ to 1 MΩ resistors in series.

•Do not apply a negative voltage

-Applying a negative voltage of −0.3 V or less to an LSI may generate a parasitic transistor, resulting in malfunction.

■ORDERING INFORMATION

Part number	Package	Remarks

MB3788PFV	24-pin Plastic SSOP
	(FPT-24P-M03)

19

Image 19

Fujitsu MB3788 manual Ordering Information, Part number Package Remarks

Contents

Description FeaturesPackage PIN Assignment MB3788 Pin No Pin name Descriptions PIN Description MB3788 Block Diagram Functional Description Low input voltage malfunction fail-safe circuit Timer and latch-type short-circuit protection circuit Recommended Operating Conditions Parameter Symbol Conditions Ratings Unit Min MaxParameter Symbol Conditions Values Unit Min Typ Max Absolute Maximum Ratings Parameter Symbol Conditions Value Unit Min Typ Max Electical Characteristics PWM TA = +25C Supply voltage VCC 8 12 16 Standard Characteristic Curves 180 HOW to SET Output Voltage OFF HOW to SET Output Current Latch-Type Short-Circuit Protection Circuit Processing without using SCP Pin Processing Without Using SCP PIN Basic Voltage-Drop Type DC/DC Converter Circuit DC/DC Converter a V φ Characteristic Measurement Diagram SCP Inpwm GND Application Circuit Part number Package Remarks Ordering Information Index Package Dimension Fujitsu Limited