Fujitsu MB3788 manual Absolute Maximum Ratings, Recommended Operating Conditions

MB3788

■ABSOLUTE MAXIMUM RATINGS

						(TA = +25°C)
Parameter	Symbol	Conditions		Ratings		Unit
			Min		Max
Supply voltage	VCC	—	—		20	V
Control input voltage	VICTL	—	—		20	V
Allowable loss	PD	Ta ≤ +25°C	—		500*	mW
Operating ambient temperature	TOP	—	-30		+85	°C
Storage temperature	Tstg	—	-55		+125	°C

*: Value obtained when mounted on 4 cm ⋅ 4 cm double-sided epoxy substrate

WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current, temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.

■RECOMMENDED OPERATING CONDITIONS

					(TA = +25°C)
Parameter	Symbol	Conditions		Values		Unit
			Min	Typ	Max
Supply voltage	VCC	—	3.6	6.0	18	V
Reference voltage output current	IOR	—	-1	—	0	mA
Error amplifier input voltage	VI	—	-0.2	—	V CC - 1.8	V
Error amplifier input voltage	VI	—	-0.2	—	V CC	V
Control input voltage	VICTL	—	-0.2	—	18	V
Output current	IO	—	3.0	—	30	mA
Operating frequency	fosc	—	100	300	1000	kHz
Operating ambient temperature	Top	—	-30	25	85	°C

WARNING: The recommended operating conditions are required in order to ensure the normal operation of the semiconductor device. All of the device’s electrical characteristics are warranted when the device is operated within these ranges.

Always use semiconductor devices within their recommended operating condition ranges. Operation outside these ranges may adversely affect reliability and could result in device failure.

No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed conditions are advised to contact their FUJITSU representatives beforehand.

7