Fujitsu MBB2147RC Diagnostics and Maintenance, Tests, Initial seek operation check See Subsection

Diagnostics and Maintenance

6.2.5Tests

This HDD can be tested in the following ways:

•Initial seek operation check (See Subsection 6.3.1)

•Operation test (See Subsection 6.3.2)

•Diagnostic test (See Subsection 6.3.3)

Figure 6.1 shows the flow of these tests.

Start

Start self-test by turning the power on

		No
Test results OK?			Check host system
			(Table 6.2)
	Yes
				No
Execute an operation			Host system
			normal?
test using a host
computer or test			Yes
equipment
			Replaced or repair
		No	HDD
Test results OK?
			HDD	No
	Yes		normal?
			Yes
Continue operation
			Execute diagnostic
			test using a host
			computer or test
			equipment
			Test results OK?	No
			Yes
			Test using voltage or
			temperature stress
			Test results OK?	No
			Yes
			Normal

Figure 6.1 Test flowchart

Analyze system-related error

Analyze HDD error (Table 6.3)

70 C141-E257