Fujitsu MBB2073RC, MBB2147RC manual Packaging, 3 Box packaging

6.5 Packaging

6.5.2Box packaging

Cushion (upper)	Desicant
Cushion (lower)	Unitary paked product
	Seal side
	Conductivity bag (large)

Box (multi-box)

Figure 6.3 Box packaging

(1)Put the conductivity bag (large) into the multi-box, in addition, put the cushion (lower) into the bag.

(2)Put the bag packed products into the cushion (lower).

•Insert the seal side upward.

•In the fraction shipment, empty the slots in the Figure 6.4 where figure is larger than the number of shipment, and fill other slots with the products.

(3)Put the desiccants between the conductivity bag (large) and the cushion (lower) in the box. (20g x 10 area)

(4)Put the cushion (upper) into the box.

(5)Seal the conductivity bag (large) with the packaging tape.

(6)Close the box with the packaging tape. (Attach the tape in ‘H’ figure at the top.)

C141-E257 77