Fujitsu MPC3084AT Important Alert Items, Important Alert Messages, may give you an electric shock

Important Alert Items

Important Alert Messages

The important alert messages in this manual are as follows:

A hazarous situation could result in minor or moderate personal injury if the user does not perform the procedure correctly. This alert signal also indicates that damages to the produt or other property, may occur if the user does not perform the procedure correctly.

Task		Alert message	Page
Maintenance	1.	Don't install or remove a PCA or connect or disconnect a	1-1
		cable or connector plug when the drive is powered. This
		may give you an electric shock.
	2.	Don't touch the Disk Drive during operation. This may
		cause injuries.
	3.	Avoid dangerous detergents when cleaning the disk drive.
	1.	Before touching a PCA, perform the human body grounding	1-2
		to discharge static electricity from your body. This will
		prevent electrical damage to the PCA.
	2.	Don't install or remove a PCA or connect or disconnect a
		cable or connector plug when the drive is powered. This
		will prevent electrical damage to the disk drive.
	3.	Operating the disk drive with one or more PCA missing will
		be unpredictable. Only power the drive with all boards
		installed.
	4.	Avoid any detergent which may cause short circuits when
		cleaning assemblies.
	5.	Keep all vents open opened and unblocked.
	6.	A ribbon type cable has one line marked. Ensure that this
		line is always connected to pin 1 of the cable connector.
	The DE is completely sealed. Do not open the DE in the field.		1-2
	When asking for repair, save all data stored in the disk drive		1-3
	beforehand. Fujitsu Limited is not responsible for any loss of
	data during service and repair.
	The disk enclosure must never to opened in the field. Opening		1-12
	the disk enclosure may cause irreparable damage.

C141-F029-01EN vii