Manuals / Fujitsu / Computer Equipment / Computer Drive

Fujitsu MPC3043AT Perform any removal after the system power is completely, power ON, Task, Page

Models: MPC3064AT MPC3032AT MPC3043AT MPC3084AT MPC3102AT MPC3096AT

1 31

Download 31 pages 266 b

Page 9

Task		Alert message	Page

	1.	Perform any removal after the system power is completely	2-2
		disconnected. The cable must not be disconnected and the
		screws that attach the drive must not be removed with the
		power ON.
	2.	Do not move the drive until it comes to a complete stop
		(about 30 s after the power is turned OFF).
	3.	Perform the human body grounding to discharge any static
		electricity from your body.

viii	C141-F029-01EN

Image 9

Fujitsu MPC3043AT Perform any removal after the system power is completely, power ON, electricity from your body, Task

Contents

DISK DRIVES MAINTENANCE MANUAL MPC3032AT MPC3043AT MPC3064AT MPC3084AT MPC3096AT MPC3102ATC141-F029-02EN REVISION RECORD Revised contentsApril EditionThis page is intentinally left blank Chapter 1 MAINTENANCE AND DIAGNOSTIC Chapter 2 REMOVAL AND REPLACEMENT PROCEDUREPREFACE The DE is completely sealed. Do not open the DE in the field Conventions for Alert MessagesC141-F029-01EN LIABILITY EXCEPTIONThis page is intentinally left blank cable or connector plug when the drive is powered. This Dont install or remove a PCA or connect or disconnect aAvoid dangerous detergents when cleaning the disk drive be unpredictable. Only power the drive with all boardspower ON Perform any removal after the system power is completelyabout 30 s after the power is turned OFF disconnected. The cable must not be disconnected and theCHAPTER 2 REMOVAL AND REPLACEMENT PROCEDURE CONTENTSThis page is intentionally left blank TABLES FIGURESThis page is intentinally left blank 1.1 Maintenance 1.2 Operation Confirmation CHAPTER 1 MAINTENANCE AND DIAGNOSIS1.3 Troubleshooting Procedure 1.1 Maintenance 1.1.1 Rules for maintenance1.1.2 Maintenance requirements 5. Keep all vents open opened and unblockedThe DE is completely sealed. Do not open the DE in the field Page b. Unpacking c. Installationd Never ever remove the DE seal label and screws and the DE cover d. Packaging1.1.3 Maintenance levels 1.1.4 Disk drive revision numberFigure 1.1 Disk drive revision number label Figure 1.2 Display of disk drive revision number 1.1.6 Self-diagnostics 1.1.5 Tools and test equipment1.1.7 Test Figure 1.3 Test flowchart Table 1.1 Status register contents Table 1.2 Disposition for error register contents1.2 Operation Confirmation 1.2.1 Operation test 1.2.2 Diagnostic test 1.3 Troubleshooting Procedure 1.3.1 Troubleshooting procedure1.3.2 Troubleshooting disk drive replaced in field Table 1.3 System level and field troubleshooting 1.3.3 Troubleshooting at factory CHAPTER 2 REMOVAL AND REPLACEMENT PROCEDURE 2.1 Spare Parts 2.2 Disk Drive Removal2.1 Spare Parts 2.2 Disk Drive Removal Table 2.1 Model and parts numbersThis page is intentinally left blank I, Place des Etas-Unis, SILIC 310, 94588 Rungis Cedex, FRANCE Reader Comment Form FUJITSU LIMITED