E-28
SELECTING INPUT MODE (Continued)
VIDEO INPUT M ODE
1Press to select the input mode.
You can select from VIDEO 1 mode to VIDEO 7
mode.
The video modes corresponding to each input
terminal are as follows.
• VIDEO1: SCART
• VIDEO2: SCART
• VIDEO3: Video, S-video
• VIDEO4: SCART
• VIDEO5: Component video
• VIDEO6: Component video
• VIDEO7: HDMI
* For selection of the input terminal, see
“SETTING THE INPUT TERMINALS” on
P.E-40.
* You can also change VIDEO mode by pressing
– during “Video” indication on the
screen by pressing .
RGB INPUT MODE
1Press to select the input mode.
You can select between the modes from RGB1 to
RGB2.
The input terminal of each RGB mode is as follows.
• RGB1: mD-sub
• RGB2: mD-sub
* You can also change RGB mode by pressing
– during “RGB” indication on the screen by
pressing .
*You can also use the buttons
on the display’s control
panel to perform these steps.
Video1 mode
*You can also use the buttons
on the display’s control
panel to perform these steps.
RGB1 mode
MHD01862_E.book 28 ページ ２００５年１１月２５日 金曜日 午後８時５４分
Downloaded From TV-Manual.com Manuals