USING THE REMOTE CONTROL
PUTTING BATTERIES IN THE REMOTE CONTROL
(1)To remove the cover, slide it outwards while pressing it down.
(2) Place two AA batteries in the remote | (3) Close the cover until it snaps into place. |
control. Make sure that the batteries are |
|
properly oriented. |
|
PRECAUTIONS
To prevent malfunction, be sure not to apply any form of severe shock to the remote control.
To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or heating equipment.
Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner.
CAUTION
It is very important to use replacement batteries of the same type as the originally used. Do not use rechargeable batteries
When disposing of used batteries, please comply with governmental regulations or environmental public institution’s rules that apply in your country/ area.
Note
The remote control will not function properly if the batteries are dead. Be sure to replace them as needed.
