Fujitsu P300 Low-Profile boards, Installing an Additional Serial Port, Mounting slot adapter

■Low-Profile boards

For units with a particularly low overall height, there are so-called low-profile boards with a slot cover with a lower overall height to match the low-profile units. To also install these low-profile boards in normal board slots, you must mount a corresponding slot adapter beforehand.

2

￿Mounting slot adapter

￿Fit the slot adapter on the slot cover of the low-profile board (1) and screw it on (2).

Now you can install the low-profile board in a suitable slot like a normal board (see the chapter "Installing board").

1

￿Removing slot adapter

￿Unscrew the screw (1) and remove the slot adapter (2).

■Installing an Additional Serial Port

An additional serial interface can be installed in a rear slot cover plate like a board. The condition is that the system board has a free internal serial port.

￿Connect the cable of the additional serial port to the connector on the system board.

34