3.1 How to Scan Business Cards
ATTENTION | When scanning multiple |
| scanner, first scan the front side of all cards, and then scan the back side of |
| the cards. The front and back sides of each individual business card will be |
| combined. |
| Note that the scanning order may change depending on the Scanner type |
| selected, which is described in the previous page. The way of combining both |
| sides differs between the two Scanner types. |
| Be careful not to select the wrong Scanner type; the front and back sides of the |
| same business card will not be combined if you select the wrong type. |
•The cards are stacked in reverse order after scanning the front side.
Front side: Scanning starts with the first sheet.
Back side: Scanning starts with the first sheet.
•The cards are stacked in the same order after scanning the front side.
Front side: Scanning starts with the first sheet.
Back side: Scanning starts with the last sheet.
6. At "Capturing Side/Color Mode/Resolution," specify the scanning settings.
Capturing Side | If the business card is |
| |
| plex," and "Duplex" is selected, after the front side scan is com- |
| pleted, start the back side scan. |
| When the message below appears, turn over the business card, |
| and click the [OK] button. |
| If you click the [Cancel] button, it becomes simplex scanning |
| mode. |
Color Mode | Specify the color mode, "B&W" (Black & White) or "Color." |
Resolution | Specify the resolution. |
| For ScanSnap: "Normal," "Better" and "Best." |
| For TWAIN scanners: 150, 200, 300, and 400dpi. |
| To scan in color: "Best" or 300dpi is recommended |
| To scan in B&W: "Best" or 400dpi is recommended. |
7.When the configuration is finished, click the [OK] button to close the [Scanner set- tings] window.
8.Click the [Scan] button on the toolbar.
3
Data Card Business Exporting and Scanning
CardMinder User’s Guide |
| 23 |
|