•Specified string is too long.
Cause: | The specified string is too long. Up to 128 |
| to 64 |
User response: | User response: Reduce the number of characters in the string so that |
| they do not exceed 128 |
•Cannot specify next words for filename. \:;?”<> .
Cause: | The specified filename contains one or more of the following |
| characters: \:;?”<> . |
User response: | Enter a file name that does not contain the above characters. Then, |
| make the settings again. |
•The image scanner not found.
Cause: | Possible causes include the following: an image scanner that is not |
| supported by this driver has been connected, no image scanner has |
| been connected, or the cable is not connected. |
| The scanner is used by other application. |
| (This Driver can’t be used at the same time with more than one |
| application.) |
User response: | Check the connection of the image scanner. |
| Check that the scanner is not used by other application. |
| (In the case of Windows®XP, [Switch User] lets another user log on |
| while your programs and files remain open. Therefore, when you log |
| on with [Switch User], it has the possibility that another user have |
| already used the driver. |
•The specified image scanner is being used.
Cause: | The image scanner may be already in use by another application, or |
| the TWAIN driver may have been started twice. |
User response: | After all applications are terminated, restart the image scanner for |
| scanning. |
•Selected scanner is used by other application or not connected.
Cause: | 1. | The scanner may be OFF or not connected. |
| 2. | The scanner may be already in use by other application or the |
| “Scanner and Camera” in [Control Panel]. | |
User response: | 1. | Check the power supply of the scanner or connection with PC. |
2.Close other application or “Scanner and Camera” in [Control Panel]
•An
Cause: | A fault occurred during the scan operation of the image scanner. |
95