[Power saving mode] button

This specifies the power saving mode.

If this button is clicked, the following dialog box is displayed.

Quick Start Mode

This mode keeps the lamp on regardless the scanner’s operating condition, which saves times for lamp to become steady.

Low Power Mode

To save the power consumption, this mode turns the lamp off, if the scanner is not operated for 14minutes.

* This button may not be displayed for some scanner models.

[Offset] button

When this button is clicked, the following dialog box is displayed.

Using this dialog box, the offset of the leading edge and magnification for the sub-scanning direction can be changed.

Offset Setting:

If the position of the scanned image shifts from the original document, fine adjustment is possible.

86