BASIC OPERATIONS
TURNING THE POWER ON AND STAND-BY
1
2
3
4
*You can also use the buttons on the display’s control panel to perform these steps.
Press OFF/ON to the left at the bottom of the display to the STD- BY state.
The power lamp lights up.
Press on the remote control.
The color of the power lamp changes from “Red” to “Green”.
Press , the button of the channel you want to watch, and then press or .
Select TV or the picture mode to input.
Press when the power is ON.
The color of the power lamp changes from “Green” to “Red” and the display goes into standby state.
ADJUSTING THE VOLUME
Adjusting the volume
Press 1to increase the volume.
Press 2to reduce the volume.
* Note that the volume level remains stored even when you turn OFF the power.
Muting the audio
Press
The audio is removed.
Press again to restore the audio to the original level.
The mute mode can also be released by pressing the volume buttons.
*You can also use the buttons on the display’s control panel to perform these steps.
Note
• Functions may not be available with some models and some device options.
DownloadedE-12From TV-Manual.com Manuals
When the volume adjustment button is pressed