Fujitsu P42HTA51E SERIES OTHER ADJUSTMENTS Continued, Channel Setting, Auto Store, Manual Store

OTHER ADJUSTMENTS (Continued)

CHANNEL SETTING

Press Cor Dto select the items for setting. It is switched as shown as below.

Auto Store Manual Store Sort

Press <to proceed to the next step.

Auto Store

Press Eor Fto select the country or region, and then press <.

All the channels are scanned, and only the channels that can be received are assigned to the Program Nos. * Several minutes are required to scan all the channels. To cancel the operation in progress, press ;. * See page E-32for the selectable TV frequencies.

Manual Store Channel Settings Screen

Press Eor Fto select the Program No. to be stored.

Press Cor Dto select the Manual Store items to be set (Setting or Name).

Press <to proceed.

Setting

Press Cor Dto select the setting item.

Freq. System Adjust Skip

•Freq.

Each time Eor Fis pressed, the TV frequency is switched.

•System

Each time Eor Fis pressed, the TV SYSTEM is switched.

West Euro (standard BG reception) East Euro (standard DK reception) UK (standard I reception) France (standard LL’ reception)

•Adjust

Each time Eor Fis pressed, the fine-tune adjustment for Tuning is switched.

•Skip

This function specifies whether or not to use the Skip function for the displayed Program No.

Each time Eor Fis pressed, the setting is switched.

Off On

[Off]: The Skip function is not available when Channel Up/Down has been selected.

[On]: The Skip function is available when Channel Up/Down has been selected. Press <to store.

* Select [On] when you want to skip the channels that they are not broadcasting programs.

Name

An eight-character name can be specified for each Program No.

Press Eor Fto select the character input position, and Cor Dto switch through the characters. When the input is completed, press <to store.

* When switching the programs, etc., the OSD becomes the indication by the stored name.

Sort

This function sorts the name, the data and the contents of stored programs.

Press Cor Dto select To (edit destination)/From (edit source), and Eor Fto switch the Program No.

Press <to store.

Note

•The screen display disappears if there is no operation within approximately 60 seconds.

•Depending on the model or the optional devices, some of the functions may not be available.

•The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.

•Depending on the type of signal, it may not be possible to make some of the settings or adjustments.

DownloadedE-26FromTV-Manual.com Manuals